Master Systems provides Danelec VDR service in Malaysia. We cover ships calling at Port Klang, Tanjung Pelepas, Penang, Johor, Kuantan and Bintulu, and offshore vessels working out of Labuan and Kemaman. Our engineers carry out annual performance tests (APT), new installations, retrofits, software updates and repairs on Danelec voyage data recorders (VDR) and simplified voyage data recorders (S-VDR).
SOLAS Chapter V, Regulation 20 requires the whole VDR system, sensors included, to be tested every year by qualified and approved personnel. If the recorder stops working or the APT certificate runs out, port state control can record a deficiency or stop the ship from sailing. For that reason, most owners book the test for a planned port call instead of leaving it until the last weeks before the certificate expires.
VDRs installed on or after 1 July 2014 must meet IMO MSC.333(90). S-VDRs are tested against MSC.163(78). We test each unit against the standard that matches its installation date.
We test the main unit, the protective capsule, the bridge microphones and the alarm unit. We also check every connected sensor input, including GPS, gyro, speed log, echo sounder, radar and AIS. The test is run with Danelec’s own APT and service tool, and you receive a certificate that flag and class will accept. If the vessel has remote access enabled, some of the diagnostics can be done before arrival, so the engineer spends less time on board.
For newbuilds and replacement projects, we handle cabling, sensor interfacing, configuration and commissioning. If you’re replacing another maker’s recorder with a Danelec unit, Danelec conversion kits fit more than 50 manufacturer models. Existing cabling can often be reused, which shortens the time the ship spends in the yard.
Danelec’s SWAP technology stores the system software and configuration on a swappable memory card. If a main unit fails, we move the card to the replacement unit instead of setting it up from scratch, so most onboard repairs take hours, not days. We also install firmware updates. After any maintenance work we run the Service Performance Test (SPT), which Danelec requires.
The ship’s own engineers usually run the OPT once a year and after any sensor or VDR maintenance. Danelec now offers a remote OPT through its Safety Insights platform. We can help crews set it up and interpret the results.
We attend container ships, bulk carriers, tankers and LNG carriers at Malaysia’s commercial ports. We also cover offshore supply vessels and accommodation units working from Labuan, Kemaman and Bintulu, as well as passenger and government vessels that carry a VDR. Danelec in Malaysia is supported by the same engineering team that handles our navigation and safety work in the region, so one attendance can often cover several items of bridge equipment.
To book, send us:
With these details we can confirm the scope and bring the spare parts the job may need. That reduces the chance of a second visit. Contact us today.
How often does a Danelec VDR need an annual performance test?
Once a year. SOLAS Chapter V requires the VDR or S-VDR and all its connected sensors to be tested by approved service personnel every year.
Can the APT be done during cargo operations?
In most cases, yes. The engineer needs access to the bridge and the connected equipment, so please tell us in advance about any planned shutdowns.
What is the difference between a VDR and an S-VDR?
An S-VDR records a smaller set of data. It was allowed for certain existing cargo ships built before 1 July 2002. Newer ships and passenger vessels carry a full VDR.
Can you replace a VDR from another manufacturer with a Danelec unit?
Yes. Danelec conversion kits cover more than 50 models from other makers, and the existing cabling can often be reused.
What happens if the APT certificate expires?
Port state control can record a deficiency, and the ship can be detained if the VDR isn’t working. If you book the Danelec service in Malaysia before your next port call, the test can be done within the normal port stay.