Furuno is one of the most widely used brands of marine electronics. Radars, ECDIS, GMDSS radios and voyage data recorders (VDRs) from Furuno are found on many cargo ships, offshore vessels, fishing boats and yachts. Like any electronic equipment, they need regular testing, servicing and, from time to time, repair. Master Systems is a Furuno service provider in Netherlands that helps ship owners, managers and crews keep this equipment working and compliant.
This page explains which Furuno equipment we service, how the process works and what you receive afterwards.
Furuno Equipment We Service
Our technicians work on a wide range of Furuno navigation and communication equipment. This includes:
Navigation equipment
- Radar and ARPA systems, such as the FAR series
- ECDIS, such as the FMD series
- GPS receivers and satellite compasses
- AIS transponders, such as the FA-170
- Echo sounders and speed logs
- Autopilots and conning displays
Communication equipment
- VHF radios with DSC
- MF/HF radio installations
- Inmarsat C terminals, such as the FELCOM series
- NAVTEX receivers
Recording equipment
- Voyage data recorders (VDR) and simplified VDRs (S-VDR), such as the VR series
Our Furuno Services
As a Furuno service provider in Netherlands, Master Systems offers the following services:
- Troubleshooting and repair: We find the cause of a fault and repair or replace the faulty part.
- Installation and commissioning: We install new Furuno equipment and set it up correctly.
- Software updates: We load approved software and chart updates where required.
- VDR annual performance test (APT): We test the VDR and issue the APT certificate.
- GMDSS radio surveys: We check radio equipment as part of the annual survey.
- AIS annual test: We test the AIS and provide the test report.
- Spare parts and replacement units: We supply parts or new units when repair is not possible.
Rules That Apply
Many Furuno systems on commercial ships are part of required safety equipment. Therefore, servicing must follow international and national rules, including:
- SOLAS Chapter IV for radio communications (GMDSS)
- SOLAS Chapter V for navigation equipment, VDR and AIS
- IMO performance standards for each type of equipment
- Flag state and class society requirements
- Manufacturer instructions for testing and maintenance
How the Service Works
Working with a Furuno service provider in Netherlands should be simple. Our process has five steps:
- Request: You send the vessel name, port, arrival date, equipment model and a short description of the fault or service needed.
- Preparation: We check the model and prepare the tools, software and likely spare parts.
- On-board work: Our technician attends the vessel, carries out the test or repair and checks that the equipment works correctly.
- Approval: If extra parts or work are needed, we explain why and wait for your approval.
- Documents: You receive a service report and, where required, a certificate such as a VDR APT certificate.
Why Regular Furuno Servicing Matters
First of all, navigation and communication equipment directly affects safe navigation. A radar or GPS fault can lead to poor situational awareness, especially in busy waters or bad weather.
In addition, some tests are legal requirements. For example, VDRs need an annual performance test, and GMDSS equipment is checked during radio surveys. Port State Control officers often check these certificates.
Finally, regular servicing helps avoid unexpected breakdowns. As a result, faults can be fixed during a planned port call instead of causing a delay.
Common Signs Your Furuno Equipment Needs Service
Contact a technician if you notice any of the following:
- Weak, noisy or unstable radar picture
- Alarms appearing on the ECDIS or VDR
- GPS or heading data dropping out
- AIS not sending or receiving targets
- Radio calls that are unclear or fail DSC tests
- Screens freezing, restarting or showing error messages
Why Choose Master Systems
As a Furuno service provider in Netherlands, Master Systems offers clear and practical support. Specifically, we provide:
- Service for Furuno navigation, communication and VDR equipment
- On-board repairs during port calls
- Annual tests and surveys with the required certificates
- Clear reports and honest advice on repair or replacement
- One team for Furuno and other marine electronics brands
Frequently Asked Questions
What Furuno equipment do you service?
We service Furuno radars, ECDIS, GPS, AIS, echo sounders, autopilots, GMDSS radios, Inmarsat C terminals and VDRs.
Can you carry out the VDR annual performance test on a Furuno VDR?
Yes. We carry out the APT on board and issue the APT certificate after the test.
Can you repair Furuno equipment on board?
Yes. Most faults are diagnosed and repaired on board. If a part is needed, we supply it or arrange a replacement unit.
Do you also service other brands?
Yes. Besides Furuno, we work on equipment from several other marine electronics manufacturers. This is useful for vessels with mixed bridge equipment.
What information do you need to plan a service?
Please share the vessel name, port, expected arrival, equipment model and serial number, and a short description of the problem or the test required.
What documents will I receive?
You will receive a service report for the work carried out. For annual tests, such as the VDR APT, you will also receive the relevant certificate.
Do you install new Furuno equipment?
Yes. We install, connect and commission new Furuno equipment and check that it works with the existing bridge systems.
Contact Master Systems
If you need a reliable Furuno service provider for your vessel, contact Master Systems to plan a repair, test or installation.